Advanced Setting:
Terminal
Deadband 1° F
Default
2° F
Max
0.5° F
Fan Delay 60s 120s 30s The time fan continues after mode turn off.
The min. time system on after engaging.
Waiting time between heating and cooling.
View system runtime, Heating, Cooling, Air Filter.
Min Run time 180s 300s 60s
Cycle time 180s 300s 60s
Runtime /
Sensor
Calibration
10° F -10° F
Min Description
A temperature range between the current
temperature and the heating setpoint,
where heating or cooling is not engaged.
Ability to adjust temperature readings to
improve sensor accuracy as the thermostat
nears the end of its lifecycle after years of use.
/
/
0° F
To access the Equipment Setup, click on a setting and use the scroll wheel to modify the default value by following
steps: Menu- Setting- Advanced setting.
34
To Next Page
Loading...
