Installer Access
To access the Installer Access, click Advanced Settings, enter the Professional Access Code and enter the below
Action code in the parenthesis below to gain access to below setting.
Sensor Calibration (SC)
Ability to adjust temperature readings to improve
sensor accuracy as the thermostat nears the end
of its lifecycle after years of use.
Sensitivity Level (SS)
Ability to adjust how sensitive your thermostat
sensor is to changes in the air temperature. The
lower the level, the more your system cycles to
maintain the setpoint.
Initial Setup (IS)
Use this code to repeat the initial setup process.
35
To Next Page
Loading...
