1. Select Gas/Oil/Furnace and tap "Setup".
2. Then select Appliance or Thermostat depending
on your personal preferences for fan control.
3. Tap "Next" at the bottom of the screen to continue.
1. Select Heat Pump and tap the "Setup button".
2. Then follow the on-screen instructions.
3. Tap "Next" at the bottom of the screen to continue.
Below is a list of possible examples which may help you to select correctly:
NOTE : If you are unsure of which option to select, contact 1-800-264-3457
If you have a furnace or boiler：
If you have a heat pump：
18
To Next Page
Loading...
