4
苏州万佳电器有限公司
Suzhou wanjia Electric Co.,Ltd.
Push-assist function may only be used when pushing the E-bike. Be aware
of danger of injury when bike wheels do not have ground contact while using
the push-assist function.
(4). Switching Lighting ON/OFF
To switch on bike light, hold the UP button for 1s. The lighting icon comes out and
display backlight brightness is automatically reduced.
Likewise, hold the UP button for 1s again, the bike light switches off. The lighting
icon is gone and display resumes backlight brightness.
(5). Assist Level Selection
Press the UP or DOWN button to switch between the assist levels and change
the motor output power, the default assist level ranges from level 0 to level 5. The
output power is zero on Level 0. Level 1 is the minimum power. Level 5 is the maximum
power.
Switching the Lighting Mode On/Off Interface
To Next Page
Loading...
