VINKA DC31 - Display Configuration Options; Unit and Wheel Size Settings; Speed Limit Display

7
苏州万佳电器有限公司
Suzhou wanjia Electric Co.,Ltd.
Display Setting
(1). Toggle Unit
Toggle Unit represents change unit between Metric and Imperial. The default is
“Metric”.
Enter the Toggle UNIT, press the UP or DOWN button to choose the desired
setting item, and then press the MODE button to confirm and store the changed
settings.
(2). Wheel
Wheel represents wheel diameter.
The wheel size is only for your information, not settable.
(3). Speed Limitation
Speed limitation value is just for your information, not settable.
Setting interface
Wheel Info
Toggle Unit interface