◆TRIP clear function
In TRIP mode and Trip is not 0, press the UP and DOWN buttons at the same time for more than 1 second
to clear the trip data information.
◆Exit settings
In personalized parameter settings interface,
Short press the ON/OFF button is to confirm the input.
Hold the ON/OFF button is to store the settings and exit the current setting.
Quality assurance and warranty scope
Ⅰ Warranty
1) The warranty will be valid only for products used in normal usage and conditions.
2) The warranty is valid for 24 months after the shipment or delivery to the customer.
Ⅱ
Others
The following cases do not belong to warranty scope:
1) The display is demolished.
2) The damage of the display is caused by wrong installation or operation.
3) The shell of the display is broken after the display is out of the factory.
4) The cable of the display is broken.
5) Beyond warranty period.
6) The fault or damage of the display is caused by the force majeure (e.g., fire, earthquake, etc.)
◆
Connection Layout
①Socket type male connector( display is cable free)
To Next Page
Loading...