◆Brightness
bLG refers to Backlight level settings. The settable range is 1 2 3 4 5. 1 is the darkest, 3 is standard and 5 is the
brightest. The default value is decided by the controller when the display leaves factory. Press UP/DOWN to change
the brightness levels. Hold the on/off button to confirm and exit the settings.
Backlight settings
◆Maximum speed limits
SPd refers to top speed limit settings, the settable range is 5 to 46 km/h. The top speed on
the display is reported by the controller. Press UP/DOWN to increase or decrease the numbers to
your desired value.Hold the ON/OFF buttons 1 seconds to confirm and exit the settings.
Speed limit settings
◆Push assistant speed settings
PSH refers to push assistant speed settings. The settable range is 3km/h to 6km/h. Press
UP/DOWN to increase or decrease the speed limit to your desired value. Hold the on/off button
1s to confirm and exit the settings status.
Push assistant speed settings
To Next Page
Loading...