VINKA DR23 - Switching Lighting ON;OFF; Assist Level Selection

4
Push-assistance mode
■The power-assisted push function can only be used when the user pushes the electric vehicle,
please do not use it in the riding state
◆Switching Lighting ON/OFF
Long press the UP button for more than 1 second to turn on the headlights, the instrument display shows
the headlight symbol, and the brightness of the display backlight decreases.
Press and hold the UP button here for more than 1 second to turn off the headlights, the headlight symbol
on the instrument display disappears, and the backlight brightness is restored.
Switching Lighting on/off
◆Assist Level Selection
The assist level of the E-bike drive can be changed anytime, even during riding.
The assist level ranges from 0 to 5 (level 0 to level 5). The default assist level is “1” when the display is
started. The output power is zero on Level “0”. Level “1” is the minimum output power. Level “5” is the maximum
output power.
Press UP/DOWN button to switch between the E-bike system assist levels and change the motor output
power.
Assist Level “3”