◆Switching the E-bike System mode ON/OFF
To switch on the E-bike system and provide the power supply to the controller, hold the On/Off button for 1s.
To switch off E-bike system, hold the On/Off button for 1s. The E-bike system no longer uses the
battery power.
When E-bike system is switched off, the leakage current is less than 1 μA.
■When the E-bike is parked for over 15 minutes, the E-bike system switches off automatically.
◆
Display Interface
After switching on the E-bike system, the display shows Current Speed and ODO(total distance) by default.
Press the ON/OFF button to switch between indication functions below:
ODO (Km)→ Trip (Km) → Motor Power (W)→ODO (Km)→ Max. Speed (Km/h)→ Avg. Speed (Km/h) , it
cycles back to ODO km again.
Display indication cycle interface
◆Push-assistance
To activate the push-assistance function, press and hold the DOWN button. After 1 seconds, E-bike is
activated to go at a uniform speed of 6 Km/h while the screen displays “ & P ”.
The push-assistance function will be switched off as soon as you release the DOWN button and ebike gets
back to the status before the push assistance is engaged.
To Next Page
Loading...