Viola Systems ESERV-10 - Declaration of Conformity

User’s Manual
Declaration of Conformity
(according to ISO/IEC Guide 22 and EN 45014)
Manufacturer’s Name:
Viola Systems Ltd.
Manufacturer’s Address:
Lemminkäisenkatu 32, FIN-20520 Turku, Finland
declares that this product:
Product Name:
Device Server
Model Name(s):
ESERV-10 and ESERV-10 OEM
conforms to the following standards:
EMC:
EN 55022 Emission Test (Class A)
1. Radiated Emissions (30-1000MHz)
2. Conducted Emissions (0.15-30MHz)
EN 50082-1 Immunity Test
1. IEC 801-3: Radio Frequency Electromagnetic Field
2. IEC 801-2: Electrostatic Discharge
3. IEC 801-4: Fast Transients, AC Power Ports and Signal cables
Supplementary Information:
“The product complies with the requirements of the Low Voltage Directive 73/23/EEC and
EMC directive 89/336/EEC.”
Warning: This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Manufacturer’s Contact:
Director of Quality Assurance
Viola Systems Ltd.
Lemminkäisenkatu 32, FIN-20520 Turku, Finland
Phone: +358 (0)2 01 226 226
Fax: +358 (0)2 01 226 220
ESERV-10 5 Viola Systems Ltd.