- 11 -
display. In the others, press these buttons to change the contents.
17. LEDs
Indicators for POWER, HDD and Network access.
18. Remote I/R Sensor
Used to receive signal from I/R remote controller.
19. USB2.0 Connector
Connect to USB 2.0 compatible storage device, such as USB 2.0 disk
drive, DVD+RW, card reader, etc.
20. USB Mouse Connector
Connect to USB1.1 mouse before the DVR is power on.
21. DVD Writer (optional)
Used for backup purpose if installed.
To Next Page
Loading...