Viola Systems H.264 - Network

- 62 -
 Setup Alarm – to enable the user to do Alarm Setup if “checked”. Press
ENTER or +/- (Mouse: Left click) to check/uncheck this item.
 Setup SEQ Display – to enable the user to do SEQ Display Setup if
“checked”. Press ENTER or +/- (Mouse: Left click) to check/uncheck
this item.
 Setup Scheduled Record – to enable the user to do Scheduled Record Setup
if “checked”. Press ENTER or +/- (Mouse: Left click) to check/uncheck
this item.
 Setup HDD – to enable the user to do HDD Setup if “checked”. Press
ENTER or +/- (Mouse: Left click) to check/uncheck this item.
 Setup Password – to enable the user to do Password Setup if “checked”.
Press ENTER or +/- (Mouse: Left click) to check/uncheck this item.
 Setup System – to enable the user to do System Setup if “checked”. Press
ENTER or +/- (Mouse: Left click) to check/uncheck this item.
 Setup RS-232/422/485 – to enable the user to do RS-232/422/485 Setup if
“checked”. Press ENTER or +/- (Mouse: Left click) to check/uncheck
this item.
 Setup Network – to enable the user to do Network Setup if “checked”.
Press ENTER or +/- (Mouse: Left click) to check/uncheck this item.
 Setup Factory Defaults – to enable the user to restore factory defaults to all
setup related configurations if “checked”. Press ENTER or +/- (Mouse:
Left click) to check/uncheck this item.
 Software Upgrade – to enable the user to upgrade DVR software if
“checked”. Press ENTER or +/- (Mouse: Left click) to check/uncheck
this item.
 Shutdown – to enable the user to shutdown the DVR if “checked”. Press
ENTER or +/- (Mouse: Left click) to check/uncheck this item.