6
© 2011 Directed Electronics. All rights reserved.
Alarm Features
Armed Protection
Status LED: The Status LED flashes as a visual indicator that your ve-
hicle’s security system is active.
Starter Kill: The Failsafe starter kill relay prevents the engine from
starting.
Note
May require additional parts and installation
Sensor triggers: The onboard shock sensor can distinguish minor im-
pacts from major impacts to the vehicle exterior. Minor impacts causes
the system to emit a Warn-away output. Major impacts caused for
example by a forcible entry attempt, results in a Full Trigger output.
Point of entry triggers: Opening the hood or trunk causes a Full Trig-
ger output, while opening a Door or turning on the Ignition causes
the siren to chirp 3 seconds before beginning the Full Trigger output.
This 3 second delay allows time to disarm and silence the siren in
case of accidental trigger.
Sensor Warn-away output: When the system sensors detect a Warn-
away, it triggers the siren chirps and the parking lights flash for 3
seconds.
Full Trigger output: An alarm Full Trigger sounds the siren and flashes
the parking lights for 30 seconds.
To Next Page
Loading...
