EasyManua.ls Logo

Viper 330V - Troubleshooting Common Issues; Starter Kill System Malfunctions; Valet Switch and LED Issues; Door Lock Output Reversal

Viper 330V
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2005 directed electronics, inc.
39
Door Lock Learn Routine does not learn door locks.
Check connections to be sure everything is properly connected. Refer to the
Keyless
Entry Systems—Three Types
section of this guide for correct wire connections.
Check the
Door Lock Learn Routine
section of this guide to ensure the correct pro-
cedure is being used.
Door Lock Learn Routine does not work, the unit enters the
learn routine then chirps horn and exits.
Some cars do not flash the parking lights with the door open. For these vehicles,
to program the unit correctly the door needs to be closed (so that the parking lights
will flash with the factory keyless system).
Feature Programming routine does not work, the unit enters the
learn routine then chirps and exits.
Check the Door Input connections. If the dome light is used for door trigger input,
then the dome light must turn off in step 3.

Related product manuals