Why does my Viper 50000406 Scrubber squeegee leave marks on the floor?
If the squeegee on your Viper Scrubber is leaving marks on the floor, it could be due to debris under the squeegee blades; remove any debris. Alternatively, the squeegee blades might be worn, chipped, or torn, in which case you should replace them. The squeegee might also need adjustment using the knob; make sure to adjust it.
What does it mean when the 3 battery charge indicators are flashing on my Viper 50000406 Scrubber?
If the 3 battery charge indicators are flashing simultaneously on your Viper Scrubber, it could indicate a brush motor overload. Try using less aggressive brushes. Alternatively, foreign materials might be preventing the brush from rotating. Try cleaning the brush hub.
How to resolve insufficient solution flow to brushes in Viper 50000406?
If the solution flow to the brushes is insufficient on your Viper Scrubber, the solution/clean water filter might be dirty. Try cleaning the filter.
Explains warning symbols displayed directly on the machine for safe operation.
Provides critical warnings and cautions for preventing damage and injury during operation.
Details the function and location of all controls, switches, and indicators on the panel.
Steps to inspect, connect, and set new batteries, including initial charging checks.
Guide to installing batteries and configuring the machine/charger for specific battery types.
Steps for safely starting and stopping the machine, including pre-operation checks.
Detailed steps for safely shutting down all machine systems and turning off the ignition.
Instructions for performing the scrubbing and drying functions of the machine.
Explanation of battery status lights and advice on managing battery charge for longevity.
Instructions for connecting the charger, monitoring status lights, and completing the charge.
To Next Page
General
