Viper AS5160-US - User Manual

Questions and Answers

A
April GriffinAug 19, 2025
What to do if the recovery water vacuuming is insufficient in my Viper Scrubber?
- S
  Sabrina NormanAug 19, 2025
  If the recovery water vacuuming of your Viper Scrubber is insufficient, several factors could be at play. First, check if the recovery water tank is full and empty it if necessary. Next, ensure the hose is properly connected to the squeegee. Inspect the vacuum grid for clogs or a stuck float and clean as needed. Examine the squeegee for dirt or worn/damaged blades, cleaning or replacing them as necessary. Finally, verify that the tank cover is correctly closed, the gasket is intact (replace if damaged), and the bend tube is free of clogs.
J
Jon DiazAug 21, 2025
Why does the squeegee on my Viper Scrubber leave marks on the floor?
- J
  Jane BruceAug 21, 2025
  If the squeegee on your Viper Scrubber leaves marks on the floor, start by checking for and removing any debris under the squeegee blades. If the blades are worn, chipped, or torn, replace them. Also, ensure that the squeegee has been properly adjusted using the adjustment knob.
A
Andrea WattsAug 23, 2025
How to fix Viper AS5160-US when the motors don't work and no warning light is on?
- R
  Ronald HoldenAug 23, 2025
  If the motors of your Viper Scrubber do not work and no warning light turns on, it could be due to a disconnected battery connector. Ensure the battery connector is securely connected. Alternatively, the batteries might be completely discharged, in which case you should charge them.
W
whitakerjamesAug 26, 2025
Why are the 3 battery charge indicators flashing simultaneously on my Viper Scrubber?
- A
  Andrea HansonAug 26, 2025
  If the 3 battery charge indicators on your Viper Scrubber are flashing simultaneously, it may be due to brush motor overload. Try using less aggressive brushes. Alternatively, there might be foreign materials, such as tangled threads, preventing the brush from rotating. Clean the brush hub to resolve this.
W
Wyatt CohenAug 28, 2025
What to do if the brushes don't work and the red warning light is on for Viper Scrubber?
- J
  James ColeAug 28, 2025
  If the brushes on your Viper Scrubber do not work and the red warning light is on, the batteries may be discharged. Charge the batteries to resolve this issue.
J
Jessica MartinezAug 30, 2025
What to do if the solution flow to the brushes is insufficient in Viper AS5160-US?
- C
  Caleb DavisAug 30, 2025
  If the solution flow to the brushes of your Viper Scrubber is insufficient, the solution/clean water filter might be dirty. Clean the filter to ensure adequate flow.
S
Sabrina SanchezSep 1, 2025
What to do if my Viper AS5160-US does not move?
- J
  John OliverSep 1, 2025
  Turn the ignition key to “0”, then try to start the machine again without pressing the switches.
S
Steven PerezSep 3, 2025
What to do if the Viper AS5160-US Scrubber's vacuuming is insufficient?
- L
  Leah WebbSep 3, 2025
  Insufficient recovery water vacuuming in your Viper Scrubber can occur for several reasons. The recovery tank might be full, so try emptying it. The hose might be disconnected from the squeegee, so ensure it is properly connected. Also, the vacuum grid could be clogged, or the float stuck, requiring you to clean the grid and check the float. The squeegee itself could be dirty, or the blades worn, so clean and inspect the squeegee. Finally, the tank cover might not be sealed, the gasket damaged, or the bend tube clogged; ensure the cover is correctly closed, replace the gasket if needed, and clear any blockage in the bend tube. Also, the recovery water tank might be dirty, so clean it.
D
dorothy14Sep 5, 2025
Why aren't the brushes working and the red light is on for my Viper AS5160-US Scrubber?
- A
  agarciaSep 5, 2025
  If the brushes on your Viper Scrubber aren't working and the red warning light is on, the batteries may be discharged. Try charging the batteries to resolve this issue.
M
Monica RamosSep 7, 2025
How to fix Viper AS5160-US when motors don't work and no lights are on?
- N
  Nicole SullivanSep 7, 2025
  If the motors on your Viper Scrubber aren't working and no warning lights are on, it could be due to a disconnected battery connector. Ensure you connect the battery connector. Alternatively, the batteries might be completely discharged, so try charging them.

Viper AS5160-US Specifications

General

Model	AS5160-US
Power Source	Battery
Brand	Viper
Cleaning Path Width	20 inches
Solution Tank Capacity	16 gal (61 L)
Recovery Tank Capacity	16 gal (61 L)
Battery Voltage	24 V
Voltage	24 V
Pad Size	20 inches
Water Tank Capacity	16 gal (61 L)
Brush Motor	0.75 hp (560 W)