Why does my Viper Scrubber squeegee leave marks on the floor?
If the squeegee on your Viper Scrubber is leaving marks on the floor, it could be due to debris under the squeegee blades; remove any debris. Alternatively, the squeegee blades might be worn, chipped, or torn, in which case you should replace them. The squeegee might also need adjustment using the knob; make sure to adjust it.
What does it mean when the 3 battery charge indicators are flashing on my Viper AS5160-US?
If the 3 battery charge indicators are flashing simultaneously on your Viper Scrubber, it could indicate a brush motor overload. Try using less aggressive brushes. Alternatively, foreign materials might be preventing the brush from rotating. Try cleaning the brush hub.
How to resolve insufficient solution flow to brushes in Viper Scrubber?
If the solution flow to the brushes is insufficient on your Viper Scrubber, the solution/clean water filter might be dirty. Try cleaning the filter.
General| Model | AS5160-US |
|---|---|
| Power Source | Battery |
| Brand | Viper |
| Cleaning Path Width | 20 inches |
| Solution Tank Capacity | 16 gal (61 L) |
| Recovery Tank Capacity | 16 gal (61 L) |
| Battery Voltage | 24 V |
| Voltage | 24 V |
| Pad Size | 20 inches |
| Water Tank Capacity | 16 gal (61 L) |
| Brush Motor | 0.75 hp (560 W) |
To Next Page
