Viper AS850R User Manual

EN
GLISH
USE
R MANUAL
14
LED SCREEN DISPLAY INFORMATIONS
STOP Machi
ne doesn’t move and brush doesn’t work, vacuum motor can work
00012.3 Machine add up driver time is 12.3hours
L0-18 Batteries voltage is lower 18V
U-25.5 Batteries voltage is 25.5V
ERR-01 Squeegee pulls down before machine reverse
DRIVE MOTOR ERROR INDICATOR INFORMATION
L
ED FLASH CODES EXAMPLE, ¤¤ ¤¤¤¤ means LED flash 2 times, after several seconds LED
flash 4 times.
LED is always light in normal work.
LED FLASH CODES DESCRIPTION
1.1 ¤ ¤ Ov
erheating >92°,motor overload
1.2 ¤ ¤¤ Acceler
ator malfunction
1.3 ¤ ¤¤¤ Speed l
imiter potentiometer malfunction
1.4 ¤ ¤¤¤¤ Under-v
oltage malfunction
1.5 ¤ ¤¤¤¤
¤ Overvoltage malfunction
2.1 ¤¤ ¤ P
rincipal contactor actuator opening failure
2.2 ¤¤ ¤¤ P
rincipal contactor bond
2.3 ¤¤ ¤¤¤ P
rincipal contactor malfunction, faulty electrical brake coil
2.4 ¤¤ ¤¤¤
¤ Principal contactor actuator closing failure
3.1 ¤¤¤ ¤ Acceler
ator potentiometer malfunction
3.2 ¤¤¤ ¤¤ Brake a
ctivation malfunction
3.4 ¤¤¤ ¤¤¤¤ Brake deactivation malfunction
3.5 ¤¤¤ ¤¤
¤¤¤
HPD malfunction(incorrect regulation of accelerator
potentiometer)
4.1 ¤¤¤¤ ¤ Mot
or short circuit
4.2 ¤¤¤¤ ¤
¤ Incorrect motor voltage/short circuit in motor
4.3 ¤¤¤¤ ¤
¤¤ EEPROM malfunction
4.4 ¤¤¤¤ ¤
¤¤¤ Short circuit in motor/EEPROM error

Viper AS850R Specifications

General

Brand	Viper
Model	AS850R
Category	Scrubber
Language	English