Vision Tech DLP-300 - User Manual

1
DLP-300
Label scale
Service Manual
DB SCALE
SHANGHAI DIGITAL BALANCE ELECTRONIC CO., LTD

Summary

Specifications

Specifications and Configuration

Environmental Conditions and Safety

Guidelines for operating the scale in suitable environmental conditions and safety precautions.

Positioning and Leveling the Instrument

Instructions on how to properly place and level the scale for accurate readings.

Power Sockets and Requirements

Information on power outlet specifications and necessary requirements for safe operation.

Scale Classification and Components

Communication Ports

Subject Introduction and Setup

Label Paper Installation

Instructions for installing label paper, including specifications and dimensions.

Power Switch Operation

Calibration Procedures

Mode Calibration

Steps for performing mode calibration, including zero and weight calibration.

Activating the Calibration Switch

Instructions for accessing and activating the calibration switch.

Basic Scale Operations

Function Settings

Network Settings Configuration

Printer Settings Adjustment

Repair and Replacement Guide

Removing the Upper Cover

Opening the Bottom Plate

Load Cell and Motherboard Replacement

Procedure for replacing the load cell and motherboard.

Print Driver Board Replacement

Steps for replacing the print driver board.

Printer Mechanism Replacement

Guide on how to replace the printer mechanism.

Power Board Replacement

Interface Board Replacement

Keyboard Board Replacement

Print Head Replacement

Display Board Replacement

Bill of Materials (BOM)

Vision Tech DLP-300 Specifications

General

Auto Power Off	Yes
Overload Indicator	Yes
Low Battery Indicator	Yes
Readability/Precision	0.1 kg
Power Supply	AC adapter
Units	lb / kg
Display	LCD