1.4 Positioning and horizontal instrument
1）Positioning
2）Horizontal instrument
2）horizontal instrument
If the scale is not completely level, please adjust the four adjusting feet
at the bottom of the scale to turn clockwise or counterclockwise to make
the blisters of the level in the center circle. Turning the adjustment foot
counterclockwise (viewed from the top of the scale) will lower that part of
the scale. Turning the adjustment foot clockwise (viewed from the top of
the scale) will raise that part of the scale.
The scale must be placed on a flat and
stable surface. Keep the scale away
from fans, ventilation systems or direct
passages of strong air currents.
Because of these air turbulences, they
can be picked up by the very sensitive
weighing platform of the scale and may
cause incorrect weight readings.
To Next Page
Loading...
