3
The VT2000 / VT2500 / VT2510 is built to be slim and light. It allows you to connect additional USB devices and monitors
through one convenient USB-C Cable. You can run up to 3 displays at 1920 x 1080 @ 60Hz with the VT2000 / VT250 (depending
on the host device). Extend up to 3 displays 2 x 3840 x 2160 @ 30Hz with 1 x 1920x1080 @ 60Hz with the VT2510. The 4 USB
ports let you connect mice, keyboards, external storage drives and additional devices all in one place.
FEATURES
INTRODUCTION
• Compatible with USB-C Systems via DP Alt Mode
• USB-C Power Passthrough (VT2000 up to 85W, power adapter sold separately)
• USB-C Power Delivery (VT2500 up to 85W, VT2510 up to 100W)
• 2x SuperSpeed USB 3.0 up to 5Gbps, 2x High Speed USB 2.0 up to 480Mbps
• 10/100/1000 Gigabit Ethernet port for increased network performance
• Supports 1 monitor up to 4K @ 60Hz, Supports 2 monitors up to 4K @ 30Hz
• Extend 2 displays (1920x1080 @ 60Hz) on most USB-C DP Alt Mode systems*
• VT2000 / VT2500 extend up to 3 Displays (1920x1080 @ 60Hz) DP 1.3/1.4 HBR3 with MST
• VT2510 extend up to 3 Displays (2 x 3840x2160 @ 30Hz, 1 x 1920x1080 @ 60Hz) DP 1.3/1.4 HBR3 with MST
• Supports SD V2.0/SDHC (Up to 32GB), compatible with SDXC (Up to 2TB)
*Note: Maximum resolution and number of extended displays is dependent on host system specifications.
To Next Page
Loading...
