VisionTek VT2000 - Docking Station Setup; Connecting Power

7
DOCKING STATION SETUP
Connecting Power
1. Plug the power adapter into the USB-C Power In port on the back of the dock. Connect the other end into a
power outlet.
Note: Power supply is not required for dock operation. USB-C Power Supply for charging host system via USB-C PD.
VT2000 does not include a USB-C Power Adapter, Sold Separately. VT2500 / VT2510 include 100W USB-C Power
Adapter.
USB-C
POWER IN
DISPLAYPORTDISPLAYPORT HDMI
USB 3.0USB 2 .0USB 2.0