First you must attach the two mounting brackets
to either side of the DVR. Line up the brackets to
the holes on either side of the DVR with the wings
facing out and secure them with the included
screws.
Due to the size of the DVR the best position for it is underneath the passenger seat
or on the bulk head behind the seats. Put the mounting bracket wings flat against
the surface and use screws or nuts and bolts to secure it in place.
NOTE: The DVR has an internal accelerometer to measure harsh driving events so
you must ensure that it is firmly secured in the vehicle.
VT5500 INSTALLATION GUIDE
13
Positioning and Mounting:
t +44 (0) 1246 225 745 | e orders@visiontrack.com | w visiontrack.com
To Next Page
Loading...
