VISLINK
Flydrive 120-150 Antenna 3
WARNINGS AND HAZARDS
FAILURE TO OPERATE AND USE THE EQUIPMENT OTHER THAN INSTRUCTED IN
THE MANUAL MAY RESULT IN ELECTRIC SHOCK.
HAZARDOUS WARNING LABELS
NON-IONISING RADIATION
CAUTION – HEAVY ITEMS
CAUTION – MOVING PARTS
TEST/ALIGNMENT OF UNITS FITTED WITH AC/DC POWER SUPPLY
UWARNINGU Hazardous voltages are present with lid removed
Diagnostic work on AC powered units or PCBs must be carried out in a test area designated
and equipped for live testing. If units have recently been in operation, time must be allowed
for the discharge of capacitors before handling the unit.
Hazardous AC voltages present
Possible source of radiation hazard, normally
located at waveguide connections, waveguide
joints and antennas.
During operation of the antenna
there will be moving parts; do not
touch whilst in motion
Some items of equipment may weigh
in excess of 25kg, do not attempt to
move or lift without assistance
To Next Page
Loading...
General