Visonic PowerManage User Manual

APPENDIX F. PowerLink3 IP Communicator,
D-304762 PowerMaster-10/30 G2 Installer's Guide 85
APPENDIX F. PowerLink3 IP Communicator
1
,
2
IMPORTANT NOTICE
Visonic is a manufacturer and supplier of equipment. Visonic DOES NOT provide PowerManage services
including event notification or other forwarding services.
In order to benefit fully from the PowerLink3 IP Communicator, it must be connected to a central monitoring
station or other service provider running Visonic's PowerManage.
The PowerLink3 IP Communicator is compatible with the PowerMaster control panel version 17 and above.
F1. Getting Started
The Visonic PowerLink3 IP Communicator provides a communication channel to the PowerManage server and enables
you to send events, including alarm images of PIR cameras, and to manage panel configuration. (For detailed information,
refer to the PowerManage User’s Guide.)
Note: PowerLink3 IP Communicator does not include viewing by cameras or control of options via a web interface.
F2. Specifications
SOFTWARE
Security System
•
PowerMaster events reporting to PowerManage servers
•
Providing communication channel to PowerManage servers
Management
•
IP Address: Auto configuration or Manual Configuration
• Reset to Factory Defaults Option
• Remote Firmware Upgrade
Data Security
•
AES 128 Bit encryption for SIA-IP PowerMaster events
HARDWARE
PowerMaster Connection
•
RS-232
Size
•
73 x 61.5 x 16mm (2-7/8 x 2-7/16 x 5/8 in.)
Weight
•
50g (1.8 oz.)
Color
•
Silver
Operating Temperature
•
0ºC to 49ºC (32ºF to 120ºF)
Storage Temperature
•
-20ºC to 60ºC (-4ºF to 140ºF)
Compliance with Standards
•
EN 60950, EN 55022, EN 55024
1
PowerLink3 IP Communicator is not applicable for UL installations
2
In the menus, PowerLink3 IP Communicator appears as “Broadband” or “Broadband Module”.

Visonic PowerManage Specifications

General

Brand	Visonic
Model	PowerManage
Category	Security System
Language	English