13
Controls and Features
Starting autostore
• Press and momentarily hold the
AM/FM control.
• AUTOSTORE will flash in the display
as the frequency band is scrolled
through.
• When the six strongest stations are
filled, the station stored in memory
preset control 1 will start playing.
If there are less than six strong
stations available on the
frequency band, the remaining
memory preset controls will all store
the last strong station available.
To deactivate autoset and return to
your audio system’s manually set
memory stations, press the AM/FM
control again.
CD select
CD mode may be entered by pressing
the CD control and then loading a
CD into the audio system. The first
track of the disc will begin playing.
After that, CD play will begin where it
stopped last.
If an alternative CD is desired, press
the corresponding preset control
(1– 6) of a loaded CD, or press the
DISC control to access the other
loaded CDs.
NO CD will display if the CD control
is activated when there is not a CD
present in the audio system.
If the CD control is pressed followed
by a preset number, and that
CD
AM
FM
CD
AM
FM
To Next Page
Loading...
