Vitalograph micro 6300 - Main Components of the Vitalograph micro

ENG
7Page of 44
09360 Issue 2
Vitalograph micro - Instructions for Use
with the BVF, are the contact points for the subject during
a spirometry session. There are no adverse effects if the
subject comes into contact with any other part of the device.
3. Main Components of the Vitalograph micro
The micro is a standalone spirometer. Device Studio software
allows the micro to generate reports to a computer after testing is
complete,butitisnotrequiredforthedevicetofunction.Themain
components of the micro are:
Figure 1 Vitalograph micro Components
1
USB Flash Drive containing Device Studio Software and
manuals
2 Power (On/Off) Button
3 Micro USB Port
4 Plinth
5 Flowhead
6 Flowhead Cone
7 LCD/Touch Panel Display
8 Battery Compartment (4 x 1.5V AAA batteries)
Note: Computer shown for illustration purposes only and not
supplied.