VITO 30 - Troubleshooting

15. Troubleshoong
Malfuncon Possible cause Remedial acon
Power indicator (1) stays inacve • Power cord (8) not plugged in
• Power cord (8) / connector is
defecve
• Plug in VITO
• Please contact service
VITO makes loud noises at
ltraon
• Star handles (5) are too loose
• Rotor scratches on the fryer
• Rotor defecve
• Tighten star handles (5)
• Alter posion of VITO in the
fryer
• Please contact service
Power indicator (1) ashes and/or
acousc indicator is beeping (VITO
80 beeps addionally)
• overheang protecon is
acvated
• let the device cool down
Power indicator (1) and ltraon in-
dicator (2) ashing (VITO 80 beeps
addionally)
• VITO is lted more than 15°
• Strong vibraons
• Check posion of VITO
• Check posion of VITO
• defecve turning part
VITO cannot be started • Control unit (6) defecve • Please contact service
Line fuse / Ground fault circuit
interrupter (GFCI) blowout
• Net protecon or other electron-
ic components are blocking
• Rotor defecve
• Circuit overloaded
• Change power outlet, elec.
circuit
• Please contact service
• Change power outlet, elec.
circuit
Low ltraon performance • Parcle lter is full
• Pump pipe is blocked
• Motor is defecve
• Change lter
• Empty pump-lter unit (9)
• Deep clean (boil-out)
• Please contact service
Oil splashes at sides / on top • Parcle lter blocked
• Too much space between lter
lid and pump lter unit (9)
• Filter is inserted incorrectly
• Change lter / clean unit
• Adjust lter sealing sheet
• Insert lter correctly
LEDs ash 10 sec. aer plugging in • Push buon (3) is defecve
• Control unit (6) wet inside
• Please contact service
• Let it dry
Should other issues appear, get in contact with the customer support or your local dealer!
Contact details on page 2 chapter Legal informaon.
Page 9