17. Declaraon of conformity
Issued by VITO AG | Eltastrasse 6 78532 Tulingen (Germany) | Phone:+49 (0) 7461 / 96289-0
Fax : +49 (0) 7461 / 96289-12 | Email: info@vito.ag - www.vito.ag
for the products VITO 30, VITO50, VITO80 EU Patent No. 1326692 U.S. Patent No. US7.052.605.B2
The professional oil and fat ltraon equipment is manufactured and tested according to the following
standards:
For the purposes of the EU direcves :
- 2006/42/EG Machinery Direcve
- 2014/30/EU Electromagnec Compability
- 2014/35/EU Low Voltage Direcve
- 2011/65/EU Restricon of use of certain hazardous substances in electrical and electronic equipment
- 2003/10/EC Minimum requirements to protect the safety and health of workers
- 2012/19 EU Waste Electrical and Electronic Equipment
The risks from physical eects (noise) ,The ltraon devices of the X-series meet the relevant
community harmonizaon legislaon of the european union.
- EN 61000-6-1: 2007 Immunity
- EN 61000-6-2: 2005 Immunity
- EN 61000-6-3: 2007 + A1: 2011 Emission
- EN 61000-6-4: 2007 + A1: 2011 Emission
- DIN 18876: 2018-06 Commercial kitchen equipment - Portable non-integrated oil / grease ltraon equipment - Requirements and tesng
with German, European and Internaonal (Non-European) standards
German Standard DIN EN European Standard EN Internaonal Standard IEC (IEC/CISPR)
DIN EN 61000-6-1:2007-10 based on EN 61000-6-1:2007 based on IEC 61000-6-1:2005
DIN EN 61000-6-2:2006-03 based on EN 61000-6-2:2005 based on IEC 61000-6-2:2005
DIN EN 61000-6-3:2011-09 based on EN 61000-6-3:2011-09 based on IEC 61000-6-3:2006 + A1:2010
DIN EN 61000-6-4:2011-09 based on EN 61000-6-4:2011-09 based on IEC 61000-6-4:2006 + A1:2010
DIN EN 61000-3-2:2010-03 based on EN 61000-3-2:2010-03 based on IEC 61000-3-2:2005 + A1:2008 + A2:2009
DIN EN 61000-3-3:2014-03 based on EN 61000-3-3:2014-03 based on IEC 61000-3-2:2005 + A1:2008 + A2:2009
DIN EN 60335-1:2014-11 based on EN 60335-1:2014-11 based on IEC 60335-1:2010
DIN EN 12100:2011-03 based on EN 12100:2011-03 based on ISO 12100:2011-03
DIN EN 60204-1/A1 based on EN 60204-1/A1 based on IEC 60204-1:2005+AMD1:2008 CSV
DIN EN 55014-1:2012-05 based on EN 55014-1:2012-05 based on
CISPR 14-1:2005 + A1:2008 + Cor. :2009 +
A2:2011
DIN EN 55014-2:2016-01 based on EN 55014-2:2016-01 based on CISPR 14-2:2015
- - (EG) Nr. 2023/2006 - -
- - (EG) Nr. 1935/2004 - -
DIN EN 10088-1 -
-
- -
DIN 18876 A1 -
-
- -
DIN 18876 A2 -
-
- -
DIN 18876 A3 -
-
- -
DIN EN 50396 -
-
- -
DIN EN 61003-2 -
-
- -
DIN EN 61000-3-3 -
-
- -
DIN EN 10095 -
-
- -
DIN EN 10269 -
-
- -
DIN EN 10302 -
-
-
89/109/EWG -
-
- -
EGV 1935/2004 -
-
- -
80/590/EWG -
-
- -
DIN EN 82079-1 -
-
- -
ProdSG -
-
- -
LFGB -
-
- -
DGUV-Regel 110-002 -
-
Tulingen, 2018
Andreas Schmidt
CEO
VITO AG
Page 11