Need help?Do you have a question about the Vitrea VTouch-Plus and is the answer not in the manual?
Details on using VTouch Plus keypads with the Lutron QS system, including specific models and operational notes.
Instructions for installing the keypad horizontally or vertically in a wall mounting box.
Guidance on flush-mount and floating installations, including adaptor use for drywall.
Recommended distances for mounting keypads side-by-side or one above the other.
Table specifying recommended distances between keypads for side-by-side installation.
Table specifying recommended distances for keypads installed vertically above each other.
General overview of VP gateway connection to host and keypads via a 4-wire bus.
Details the front and back panel connections of the VP Gateway.
Step-by-step instructions for wiring the 4-wire bus, connecting the configuration tool, and connecting to the host.
Outlines functions performed by the configuration software via PC connection.
Lists the operating system and software framework needed for the configuration tool.
Instructions for downloading, installing, and setting up the configuration software on a PC.
Steps to connect the PC configuration tool to the VBOX-Plus Gateway via USB.
Details operations like resetting, adding, deleting, or replacing keypads and gateways.
Procedure to reset the VBOX-Plus Gateway or keypads to their factory default settings.
Step-by-step guide on how to add new keypads to the VBOX-Plus Gateway system.
Instructions for replacing an existing keypad with a new one, ensuring ID continuity.
Procedure for replacing the VBOX-Plus Gateway using the Auto Setup function.
How to configure individual keypad settings like button functions, timing, and LED intensity.
Settings for connecting the VBOX-Plus Gateway to a host controller (RS-232 or Ethernet).
Guide to configure the VBOX-Plus Gateway as a TCP/IP Client when the host is the server.
Guide to configure the VBOX-Plus Gateway as a TCP/IP Server when the host is the client.
How to use the diagnostics page to monitor messages and test keypad functionality.
Instructions on how to adjust the brightness of the background blue LEDs on the keypads.
Detailed sequence of button presses to enter the keypad's programming mode.
How to use buttons to set the intensity level of the background blue LEDs.
Information on how the keypad exits programming mode automatically or manually.
Procedure to reset an individual keypad to its factory default settings using buttons.
Technical specifications for the VBOX-Plus Gateway, including ports, power, and dimensions.
Technical specifications for the VTouch-Plus Keypads, including power, connection, and features.
Details on the power consumption of the keypads and the VBOX-Plus Gateway.
Statement regarding compliance with FCC rules for digital devices and potential interference.
Outlines the warranty period, coverage, exclusions, and liability limitations for the product.
To Next Page
General