Vitrea VTouch-Plus - Configuring a Host as Client

VTouch-Plus Configuration Tool User Guide
VITREA Smart Home Technologies | T: +972.3.5474746 | F: +972.3.5474738 | vitrea-sh.com | support@vitrea-sh.com
Page 20 of 27
Configuring a Host as Client
Figure 14: Host Connection Setup - 2
To configure the VBOX-Plus Gateway to work with an external host via Ethernet connection as a
TCP/IP Server (The host functions as a client):
1. On the Host Connection Setup age, in the Connection Type field, select TCP Server.
2. In the VBOX-Plus Controller IP Settings, type the IP address, network Subnet Mask, Default
Gateway, and Listening Port of the VBOX-Plus Gateway.
3. Click Apply to save the configuration.