INITIAL SETUP: CONNECTING YOUR CAMERA TO THE APP
NOTE:
• Your IP Camera is supported only on a 2.4GHz Wi-Fi Network. Before setup, please make
sure your mobile device is connected to a 2.4GHz Wi-Fi Network.
• Please follow the steps below to create your User Account. You must be logged into your
User Account to register and use your IP Camera.
INITIAL CAMERA AND DEVICE SETUP:
1. ENABLE MOBILE DEVICE WI-FI
Make sure to enable Wi-Fi on your smartphone or tablet via the settings of your mobile
device.
2. LAUNCH MOBILE APP
If you have not already launched the app, tap the Vivitar Smart Home Security
application icon on your smartphone or tablet to launch the installed app.
3. TUTORIAL
A quick overview through the app appears.
Scroll through the pages to view the tutorial or tap Skip to continue the initial setup.
NOTE: A window appears during the quick overview regarding the permission of receiving
Notifications, such as sounds, icon badges, alerts. Tap Allow to allow the “Smart Home
Security” app to send you notifications. This can be configured later via your phone
settings.
4. END USER LICENSE AGREEMENT
The End User License Agreement screen appears. Tap Agree & Continue to enter the
‘Devices’ Home screen and continue to the initial registration and adding your device.
5. INITIAL REGISTERATION – IP CAMERAS ACCOUNT
You must create a new IP Cameras Account or sign in to your existing account to use your
To Next Page
Loading...
