SETTING UP YOUR VIVITAR SMART IP CAMERA:
If you haven’t already done so, please set up your Vivitar Smart IP Camera(s) by following the
steps below.
1. Open the Vivitar Smart Home Security app for Android or iOS.
2. Make sure that you have created a Group 1 Account and have completed the setup for
your Vivitar Smart Home IP Camera using the Vivitar Smart Home Security app.
3. Connect the Vivitar Smart Home IP Camera to the same Wi-Fi network as your Google
device.
NOTE: Please see Vivitar IP Camera Setup for further information.
GOOGLE ASSISTANT SETUP:
Make sure to activate your Google assistant ("OK Google") on your phone.
For further instructions – see here: Google Assistant Help - Settings
CONNECTING YOUR VIVITAR SMART HOME DEVICE TO GOOGLE:
1. To activate your Google Assistant and start a conversation say:
“OK Google, talk to Vivitar Smart Cameras”.
2. You will be prompted with the Vivitar Google Action – which will notify you that the account is
not linked yet.
Tap “Link Vivitar Smart Cameras to Google”.
3. In the Login page, enter your Vivitar Smart Home Security app credentials – your
Group 1 Account email and password – and then tap Sign in.
NOTE: This is the same account information you used to set up your Vivitar Smart Home
IP Camera in your Vivitar Smart Home Security app.
4. Grant permission to Google Assistant by typing Yes or OK.
5. You are now ready to start controlling your Vivitar Smart Home IP Camera using Google
Assistant commands.
6. To end the conversation, say “Exit”.
To Next Page
Loading...
