Vivotek CC8130 - Page 42

VIVOTEK
42 - User's Manual
■ Sharpness: Adjust the image sharpness level, which ranges from 0% to 100%.
You can click on Restore to recall the original settings without incorporating the changes. When
completed with the settings on this page, click Save to enable the setting.
If you want to congure another sensor setting using the schedule mode, please click Prole to open
the Prole Settings page as shown below.
Please follow the steps below to setup a prole:
1. Select the Enable and apply this prole checkbox.
2. Select the Schedule mode. Please manually enter a range of time.
3. Congure the White balance and Image adjustment settings in the following columns. Please refer to the
previous page for detailed information.
4. Click Save to enable the settings and click Close to exit the page.