Vivotek FD8135H - Page 123

VIVOTEK
User's Manual - 123
time in time zone.
daylight_dstactualmode <boolean> 1 6/7 Check if current time is under
daylight saving time.
(Used internally)
daylight_auto_begintime string[19] NONE 6/7 Display the current daylight
saving start time.
daylight_auto_endtime string[19] NONE 6/7 Display the current daylight
saving end time.
daylight_timezones string ,-360,-320,
-280,-240,
-241,-200,
-201,-160,
-140,-120,
-80,-40,0,
40,41,80,
81,82,83,
120,140,
380,400,48
0
6/6 List time zone index which
support daylight saving time.
updateinterval 0,
3600,
86400,
604800,
2592000
0 6/6 0 to Disable automatic time
adjustment, otherwise, it
indicates the seconds between
NTP automatic update intervals.
restore 0,
<positive
integer>
N/A 7/6 Restore the system parameters
to default values after <value>
seconds.
reset 0,
<positive
integer>
N/A 7/6 Restart the server after <value>
seconds if <value> is
non-negative.
restoreexceptnet 0,
<positive
integer>
N/A 7/6 Restore the system parameters
to default values except
(ipaddress, subnet, router, dns1,
dns2, pppoe).
This command can cooperate
with other “restoreexceptXYZ”
commands. When cooperating
with others, the system
parameters will be restored to
the default value except for a