Vivotek FD8135H - Page 139

VIVOTEK
User's Manual - 139
maxgain 0~5 100 4/4 Max gain:
0 : 2x
1 : 4x
2 : 8x
3 : 16x
4 : 32x
5 : 64x
7.10 IR cut control
Group: ircutcontrol (capability.nvideoinprofile > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
mode auto,
day,
night,
di0,
di1,
di2,
schedule
auto 6/6 Set IR cut control mode
daymodebegintime 00:00~23:59 07:00 6/6 Day mode begin time
daymodeendtime 00:00~23:59 18:00 6/6 Day mod end time
disableirled <boolean> 0 6/6 Disable built-in IR led
enableextled <boolean> 0 1/6 Enable external IR led
bwmode <boolean> 1 6/6 Switch to B/W in night mode if
enabled
sensitivity low,
normal,
high
normal 6/6 Sensitivity of light sensor
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5 -5 4/4 Adjust brightness of image
according to mode settings.
saturation -5~5 0 4/4 Adjust saturation of image
according to mode settings.
contrast -5~5 0 4/4 Adjust contrast of image