Vivotek FD8381-EV - Page 190

VIVOTEK
190 - User's Manual
Bit 0 => stream 1 supports
ePTZ or not.
Bit 1 => stream 2 supports
ePTZ or not.
The rest may be deduced by
analogy
nanystream 0, <positive integer> 0 0/7 number of any media stream
per channel
iva <boolean> 0 0/7 Indicate whether to support
Intelligent Video analysis
tampering <boolean> 1 0/7 Indicate whether to support
tampering detection.
test_ac <boolean> 1 0/7 Indicate whether to support
test ac key.
image_wdrc <Boolean> 1 0/7 Indicate whether to support
WDR enhanced.
image_ iristype <string> piris 0/7 Indicate iris type.
image_ focusassist <Boolean> 1 0/7 Indicate whether to support
focus assist.
supportsd <boolean> 1 0/7 Indicate whether to support
local storage.
timeshift <boolean> 1 0/7 Indicate whether to support
time shift caching stream.
whitelight <boolean> 0 0/7 Indicate whether to support
white light led.
iris <boolean> 0 0/7 Indicate whether to support
iris control.
temperature <boolean> 0 0/7 Indicate whether to support
temperature detection.
fisheye <boolean> 0 0/7 Indicate where fisheye
camera.
vadp <positive integer> 0 0/7 An 32-bit integer, each bit can
be set separately as follows:
Bit 0 => VADP interface
Bit 1 => Capture video raw
data
Bit 2 => Support encode jpeg
Bit 3 => Capture audio raw
data