Vivotek IP7142 - Page 73

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 73
■ Recording notify
This option allows the Network Camera to trigger when the recording disk is full or when recording
starts to rewrite older data� If you want receive Recording notify message, please refer to page 81
for detailed information�
■ Camera tampering detection
This option allows the Network Camera to trigger when the camera detects that is is being tampered
with� To enable this function, you need to congure the Tampering Detection option rst. Please refer
to page 66 for detailed information�
Event Schedule
Specify the period for the event�
■ Select the days of the week.
■ Select the recording schedule in 24-hr time format.
Action
Dene the actions to be performed by the Network Camera when a trigger is activated.
■ Trigger digital output for
seconds
Select this option to turn on the external digital output device when a trigger is activated. Specify the
length of the trigger interval in the text box.
■ Turn on IR Illuminators for seconds
Select this to turn on IR Illuminators when a trigger is activated every time or only in low light
conditions. Specify the length of trigger interval in the text box.