Vivotek IP7330 - Page 97

VIVOTEK
User's Manual - 97
<positive integer>
ptzenabled < positive integer > 0/7 An 32-bits integer, each bit can be set
separately as follows:
Bit 0 => Support camera control function
0(not support), 1(support)
Bit 1 => Build-in or external camera.
0(external), 1(build-in)
Bit 2 => Support pan operation. 0(not
support), 1(support)
Bit 3 => Support tilt operation. 0(not
support), 1(support)
Bit 4 => Support zoom operation.
0(not support), 1(support)
Bit 5 => Support focus operation.
0(not support), 1(support)
Bit 6 => Support iris operation.
0(not support), 1(support)
Bit 7 => External or build-in PT. 0(build-in),
1(external)
Bit 8 => Invalidate bit 1 ~ 7.
0(bit 1 ~ 7 are valid),
1(bit 1 ~ 7 are invalid)
Bit 9 => Reserved bit; Invalidate lens_pan,
Lens_tilt, lens_zoon, lens_focus, len_iris.
0(fields are valid),
1(fields are invalid)
protocol_https < boolean > 0/7 indicate whether to support http over SSL
protocol_rtsp < boolean > 0/7 indicate whether to support rtsp
protocol_sip <boolean> 0/7 indicate whether to support sip
protocol_maxconnect
ion
<positive integer> 0/7 The maximum allowed simultaneous
connections
protocol_maxgencon
nection
<positive integer> 0/7 The maximum allowed general
simultaneous connections
protocol_maxmegaco
nnection
<positive integer> 0/7 The maximum allowed megapixel
simultaneous connections
protocol_maxrtspcon
nection
<positive integer> 0/7 The maximum allowed rtsp simultaneous
connections