Vivotek IP7330 - Page 98

VIVOTEK
98 - User's Manual
protocol_rtp_multica
st_scalable
<boolean> 0/7 indicate whether to support scalable
multicast
protocol_rtp_multica
st_backchannel
<boolean> 0/7 indicate whether to support backchannel
multicast
protocol_rtp_tcp <boolean> 0/7 indicate whether to support rtp over tcp
protocol_rtp_http <boolean> 0/7 indicate whether to support rtp over http
protocol_spush_mjpe
g
<boolean> 0/7 indicate whether to support server push
motion jpeg
protocol_snmp <boolean> 0/7 indicate whether to support snmp
videoin_type 0, 1, 2 0/7 0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
videoin_resolution <a list of the
available resolution
separates by comma)
0/7 available resolutions list
videoin_maxframerat
e
<a list of the
available max frame
rate separates by
comma>
0/7 available framerate at the
videoin_resolution list index
videoin_codec <a list of the
available codec types
separates by comma)
0/7 available codec list
videoout_codec <a list of the
available codec types
separates by comma)
0/7 available codec list
transmission_mode Tx,
Rx,
Both
0/7 Indicate what kind of transmission mode
the machine used. TX: server, Rx: receiver
box, Both: DVR?.
network_wire <boolean> 0/7 Indicate whether to support the Ethernet
network_wireless <boolean> 0/7 Indicate whether to support the wireless
derivative_brand <boolean> 0/7 Indicate whether to support upgrade
function for the derivative brand. For
example, if the value is true, the VVTK
product can be upgraded to VVXX.
(TCVV<->TCXX is excepted)
evctrlchannel <boolean> 0/7 Indicate whether to support the http tunnel