Vivotek IP7361 - Page 135

VIVOTEK
User's Manual - 135
profile_i<0~(m-1)>_policy day, night,
schedule
4/4 The mode which the profile is
applied to.
profile_i<0~(m-1)>_begintime hh:mm 4/4 Begin time of schedule mode.
profile_i<0~(m-1)>_endtime hh:mm 4/4 End time of schedule mode.
profile_i<0~(m-1)>_win_i<0~2>_enabl
e
<boolean> 4/4 Enable motion window.
profile_i<0~(m-1)>_win_i<0~2>_name string[14] 4/4 Name of motion window.
profile_i<0~(m-1)>_win_i<0~2>_left 0 ~ 320 4/4 Left coordinate of window position.
profile_i<0~(m-1)>_win_i<0~2>_top 0 ~ 240 4/4 Top coordinate of window position.
profile_i<0~(m-1)>_win_i<0~2>_width 0 ~ 320 4/4 Width of motion detection window.
profile_i<0~(m-1)>_win_i<0~2>_heigh
t
0 ~ 240 4/4 Height of motion detection window.
profile_i<0~(m-1)>_win_i<0~2>_objsiz
e
0 ~ 100 4/4 Percent of motion detection
window.
profile_i<0~(m-1)>_win_i<0~2>_sensi
tivity
0 ~ 100 4/4 Sensitivity of motion detection
window.
5.16 Tempering Detection Settings
Group: tampering_c<0~(n-1)> for n channel product
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 4/4 Enable or disable tamper detection.
threshold 0 ~ 255 4/4 Threshold of tamper detection.
duration 10 ~ 600 4/4 If tampering value exceeds the ‘threshold’ for more than
‘duration’, then tamper detection is triggered.
5.17 DDNS
Group: ddns
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable or disable the dynamic DNS.
provider Safe100,
DyndnsDynamic,
DyndnsCustom,
TZO, DHS,
DynInterfree,
CustomSafe100
6/6 Safe100 => safe100.net
DyndnsDynamic => dyndns.org (dynamic)
DyndnsCustom => dyndns.org (custom)
TZO => tzo.com
DHS => dhs.org
DynInterfree =>dyn-interfree.it