Vivotek IP7361 - Page 136

VIVOTEK
136 - User's Manual
CustomSafe100 => Custom server using
safe100 method
<provider>_hostname string[128] 6/6 Your dynamic hostname.
<provider>_username
email
string[64] 6/6 Your user or email to login to the DDNS service
provider
<provider>_password
key
string[64] 6/6 Your password or key to login to the DDNS
service provider.
<provider>_serverna
me
string[128] 6/6 The server name for safe100. (This field only
exists if the provider is customsafe100)
5.18 UPnP Presentation
Group: upnppresentation
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable or disable the UPNP presentation service.
5.19 UPnP Port Forwarding
Group: upnpportforwarding
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable or disable the UPNP port forwarding service.
upnpnatstatus 0~3 6/7 The status of UpnP port forwarding, used internally. 0 = OK, 1
= FAIL, 2 = no IGD router, 3 = no need for port forwarding
5.20 System Log
Group: syslog
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enableremotelog <boolean> 6/6 Enable remote log.
serverip <IP address> 6/6 Log server IP address.
serverport 514, 1025~65535 6/6 Server port used for log.
level 0~7 6/6 Levels used to distinguish the importance of the
information:
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT