Vivotek IP8132 - Page 130

VIVOTEK
130 - User's Manual
setting.
1 = worst quality, 5 = best quality.
s<0~(m-1)>_h264_qvalu
e
0~51 4/4 Manual video quality level input.
(s<0~(m-1)>_h264_quant = 0 or 99)
s<0~(m-1)>_
h264_qpercent
1~100 4/4 Using percentage to represent manual video
quality level input.
(s<0~(m-1)>_h264_quant = 100)
s<0~(m-1)>_h264_bitrate 1000~8000000 4/4 Set bit rate in bps when choosing cbr in
“ratecontrolmode”.
s<0~(m-1)>_h264_maxfr
ame
1~25,
26~30 (only for
NTSC or 60Hz
CMOS)
1/4 Set maximum frame rate in fps (for h264).
s<0~(m-1)>_h264_profil
e
0~2 1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile
s<0~(m-1)>_mjpeg_quan
t
0, 1 ~ 5
99, 100
4/4 Quality of JPEG video.
0, 99, 100 is the customized manual input
setting.
1 = worst quality, 5 = best quality.
s<0~(m-1)>_mjpeg_qval
ue
0~200 4/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant = 0 or 99 or 100)
s<0~(m-1)>_mjpeg_qper
cent
1~100 4/4 Using percentage to represent manual video
quality level input.
(s<0~(m-1)>_mjpeg_quant = 0 or 99 or 100)
s<0~(m-1)>_mjpeg_maxf
rame
1~25,
26~30 (only for
NTSC or 60Hz
CMOS)
1/4 Set maximum frame rate in fps (for JPEG).
s<0~(m-1)>_forcei 1 7/6 Force I frame.