Vivotek IP8132 - Administrator Ip Address

VIVOTEK
User's Manual - 63
Network: This rule allows the user to assign a network address and corresponding subnet mask to the
Allow/Deny List� The network mask is written in the CIDR format�
For example:
Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List.
Note: This rule is only applied to IPv4.
For example:
Administrator IP address
Always allow the IP address to access this device: You can check this item and add the Administrator’s
IP address in this eld to make sure the Administrator can always connect to the device.
IP address 192�168�2�x will be blocked�