Vivotek IP8132 - Application

VIVOTEK
User's Manual - 81
Application
Advanced Mode
This section explains how to congure the Network Camera to responds to particular situations
(event)� A typical application is that when a motion is detected, the Network Camera sends
buffered images to an FTP server or e-mail address as notications.
As shown on the right, an event can be triggered
by many sources, such as motion detection, PIR
(Passive Infra Red motion detector - IP8133 &
IP8133W), or external digital input devices� When an
event is triggered, you can specify what type of action
that will be performed. You can congure the Network
Camera to send snapshots or videos to your email
address or FTP site�
ex. Motion Detection,
Digital Input,
System Reboot
Event Trigger
ex. Snapshot, Video Clips,
System Log, Digital Output
ex. Email, FTP, HTTP Server,
Network Storage
Media
(what to send)
Server
(where to send)
Action