Vivotek IP8132 - Page 132

VIVOTEK
132 - User's Manual
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE SECURITY
(get/set)
DESCRIPTION
brightness -5 ~ 5 4/4 Adjust brightness of image according to mode settings.
saturation -5 ~ 5 4/4 Adjust saturation of image according to mode settings.
Contrast -5 ~ 5 4/4 Adjust contrast of image according to mode settings.
sharpness -3 ~ 3 4/4 Adjust sharpness of image according to mode settings.
IBPE_nrenable <boolean> 4/4 Enable noise reduction.
IBPE_nrmode 1 ~ 3 4/4 Adjust noise reduction mode.
1 => DeGaussian
2 => DeImpulse
3 => DeGaussian + DeImpulse
IBPE_nrstrength 1 ~ 63 4/4 Adjust noise reduction strength. 1 is minimum and 63 is
maximum.
7.12 Image setting for preview
Group: imagepreview_c<0~(n-1)> for n channel products
NAME VALUE SECURITY
(get/set)
DESCRIPTION
brightness -5 ~ 5 4/4 Preview of brightness adjustment of image
according to mode settings.
saturation -5 ~ 5 4/4 Preview of saturation adjustment of image
according to mode settings.
Contrast -5 ~ 5 4/4 Preview of contrast adjustment of image
according to mode settings.
sharpness -3 ~ 3 4/4 Preview of sharpness adjustment of image
according to mode settings.
IBPE_nrenable <boolean> 4/4 Preview of adjusting enabling noise reduction.
IBPE_nrmode 1 ~ 3 4/4 Preview of adjusting noise reduction mode.
1 => DeGaussian
2 => DeImpulse
3 => DeGaussian + DeImpulse
IBPE_nrstrength 1 ~ 63 4/4 Preview of adjusting noise reduction strength. 1
is minimum and 63 is maximum.
Group: imagepreview