Vivotek IP8132 - Page 134

VIVOTEK
134 - User's Manual
win_i<0~2>_top 0 ~ 240 4/4 Top coordinate of window position.
win_i<0~2>_width 0 ~ 320 4/4 Width of motion detection window.
win_i<0~2>_height 0 ~ 240 4/4 Height of motion detection window.
win_i<0~2>_objsize 0 ~ 100 4/4 Percent of motion detection window.
win_i<0~2>_sensitivity 0 ~ 100 4/4 Sensitivity of motion detection window.
Group: motion_c<0~(n-1)> profile for m profile and n channel product (capability.nmotionprofile
> 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
i<0~(m-1)>_enable <boolean> 4/4 Enable profile 1 ~ (m-1).
i<0~(m-1)>_policy schedule 4/4 The mode which the profile is applied to.
i<0~(m-1)>_begintime hh:mm 4/4 Begin time of schedule mode.
i<0~(m-1)>_endtime hh:mm 4/4 End time of schedule mode.
i<0~(m-1)>_win_i<0~2>_enable <boolean> 4/4 Enable motion window.
i<0~(m-1)>_win_i<0~2>_name string[14] 4/4 Name of motion window.
i<0~(m-1)>_win_i<0~2>_left 0 ~ 320 4/4 Left coordinate of window position.
i<0~(m-1)>_win_i<0~2>_top 0 ~ 240 4/4 Top coordinate of window position.
i<0~(m-1)>_win_i<0~2>_width 0 ~ 320 4/4 Width of motion detection window.
i<0~(m-1)>_win_i<0~2>_height 0 ~ 240 4/4 Height of motion detection window.
i<0~(m-1)>_win_i<0~2>_objsize 0 ~ 100 4/4 Percent of motion detection window.
i<0~(m-1)>_win_i<0~2>_sensitiv
ity
0 ~ 100 4/4 Sensitivity of motion detection window.
7.16 Tampering detection settings
Group: tampering_c<0~(n-1)> for n channel product (capability.tampering > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 4/4 Enable or disable tamper detection.
threshold 0 ~ 255 4/4 Threshold of tamper detection.
duration 10 ~ 600 4/4 If tampering value exceeds the ‘threshold’ for more than
‘duration’ second(s), then tamper detection is triggered.