VIVOTEK
User's Manual - 143
vi <integer> 6/6 Indicate the source id of vi trigger.
This field is required when trigger condition is “vi”.
One bit represents one digital input. The LSB
indicates VI 0.
mdwin <integer> 6/6 Indicate the source window id of motion detection.
This field is required when trigger condition is “md”.
One bit represents one window.
The LSB indicates the 1
st
window.
For example, to detect the 1
st
and 3
rd
windows, set
mdwin as 5.
mdwin0 <integer> 6/6 Similar to mdwin. The parameter takes effect when
profile 1 of motion detection is enabled.
inter 1~999 6/6 Interval of snapshots in minutes.
This field is used when trigger condition is “seq”.
weekday 0~127 6/6 Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday and Sunday,
set weekday as 66.
begintime hh:mm 6/6 Begin time of the weekly schedule.
endtime hh:mm 6/6 End time of the weekly schedule.
(00:00 ~ 24:00 sets schedule as always on)
action_do_i<0~(ndo-1)>
_enable
0, 1 6/6 Enable or disable trigger digital output.
action_do_i<0~(ndo-1)>
_duration
1~999 6/6 Duration of the digital output trigger in seconds.
action_wled_i<0~(nwled-
1)>_enable
0, 1 6/6 Enable or disable trigger white light LED.
action_wled_i<0~(nwled-
1)>_duration
1~999 6/6 Duration of the white light LED trigger in seconds.
action_server_i<0~4>_en
able
0, 1 6/6 Enable or disable this server action.
action_server_i<0~4>_m
edia
NULL,
0~4,101
6/6 Index of the attached media.
101: recording notify
To Next Page
Loading...
