VIVOTEK
User's Manual - 11
When using a non-PoE switch
Use a PoE power injector (optional) to connect between the Network Camera and a
non-PoE switch�
POWER
COLLISION
LINK
RECEIVE
PARTITION
1
2
3
4
5
Non-PoE Switch
PoE Power Injector
(optional)
1� This product is intended to be used within a building� Unless a weatherproof or
waterproof housing is provided, this product should not be installed at a location
exposed to elements�
2. The ITE is to be connected only to PoE networks with UL certicated surge suppressor
to the outside plan" or equivalent�
NOTE:
To Next Page
Loading...
