Vivotek IP8173H - Page 151

VIVOTEK
User's Manual - 151
first.
“imagequality” indicates image
quality first.
s<0~(m-1)>_mjpeg_quant 1~5,
99, 100
3 1/4 Quality of JPEG video.
99 is the customized manual
input setting.
1 = worst quality, 5 = best
quality.
100 is percentage mode.
s<0~(m-1)>_mjpeg_qvalue 2~97 29 1/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant =
99)
s<0~(m-1)>_mjpeg_qperce
nt
1~100 49 1/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant =
100)
s<0~(m-1)>_mjpeg_bitrate 1000~400000
00
14000000 1/4 Set bit rate in bps when
choosing cbr in
“ratecontrolmode”.
s<0~(m-1)>_mjpeg_maxvb
rbitrate
1000~"capabili
ty_videoin_c<
n>_mjpeg_ma
xbitrate"
40000000 1/4 The maximum allowed bit rate
in fixed quality mode.
When the bit rate exceeds this
value, frames will be dropped to
restrict the bit rate.
* Only valid when
"ratecontrolmode"= vbr
s<0~(m-1)>_mjpeg_maxfra
me
1~50,
51~60 (only
for NTSC or
60Hz CMOS)
10 1/4 Set maximum frame rate in fps
(for JPEG).
5M : 1~13fps
3M : 1~20fps
2M : 1~30fps
1080P : 1~30fps
720P : 1~60fps
(for NTSC or 60Hz CMOS)
wdr_mode 0~1 1 1/4 Turning WDR Pro on or off.
0: off
1: on
wdr_strength 0~2 1 1/4 The strength of WDR Pro.
0: low
1: medium